
Specifications
Description
The Watts 709DCDA-OSY-CFM 3/4NYC 8 is a 8" double check detector assembly (DCDA) with Flanged connections, approved for low health hazard protection. It features a cast iron body and a rubber seat. Rated to 175 psi and 33°F to 110°F.
This 8 inch double check valve backflow preventer assembly is designed to prevent the reverse flow of contaminated water of non-potable quality from being pumped or siphoned into the potable water supply due to backsiphonage and or backpressure. It is ideal for protection at cross-connections identified as non-health hazard applications and contaminants found at the service line. This assembly consists of a fused epoxy coated cast iron body, OSY resilient seated gate valves, test cocks, and a modular check design with center stem guide. The captured spring is accessible through a bolted cover plate. This NYC version comes with an NYCDEP approved CFM meter and four sets of 304SS bolts/nuts with a 1/4 inch hole drilled axially through the bolt.The coating on this backflow assembly uses ArmorTek®, a patented 3-part advanced epoxy coating system designed to limit both microbial induced (MIC) and exposed metal substrate corrosion.
Features
- Utilizes advanced ArmorTek coating technology to resist corrosion of internals
- Cast iron body construction with patented 3-part advanced epoxy coating system designed to limit both microbial induced (MIC) and exposed metal substrate corrosion
- Modular check assemblies
- Detector bypass with NYCDEP approved meter
- Drilled bolts to eliminate flange drilling
- Includes: Test Cocks
- Includes: Bypass
Common Questions
- What hazard level is this DCDA approved for?
- It is rated for low health hazard (non-toxic, "pollutant") cross-connections only. Where the substance downstream could be a health hazard, codes require a reduced pressure zone (RPZ) assembly instead. The assembly is listed to ASSE 1048.
- Can this be installed on potable water?
- No. This model is not certified lead-free, so it may not be installed in potable water systems in states enforcing the NSF/ANSI 372 weighted-average lead rule. Use it on non-potable service — fire lines, irrigation or industrial water — or order the LF (lead-free) version of this model for drinking-water use.
- Does this assembly have to be tested every year?
- Yes. This is a field-testable assembly. Most water authorities require it to be tested and certified by a licensed backflow tester at installation and annually thereafter. It carries USC FCCCHR approval, which many jurisdictions accept as their sole approval list.
- What shutoff valves are included?
- It is supplied with outside screw and yoke (OS&Y) gate valves on the inlet and outlet. OS&Y gates give the visible open/shut indication that fire-line and many water-authority specs require.
- Is this suitable for a fire sprinkler line?
- Yes. Detector assemblies are built for fire sprinkler service: the metered bypass registers the low flows that reveal a leak or an unauthorized tap on the fire line. This model is UL Classified and FM Approved. The bypass meter reads in CFM.
- How does this have to be installed?
- This assembly is approved for horizontal N-pattern installation, with the shutoff valves in line with the body. USC approval is orientation-specific, so it must be installed in that position.
Specifications
- Type: Double Check
- Size: 8"
- Inlet Size: 8"
- Outlet Size: 8"
- Connection: Flanged
- Body Material: Cast Iron
- Seat / Seal Material: Rubber
- Max Pressure (psi): 175
- Application: Fire Protection
- Backflow Protection: Both
- Operation: Continuous
- Country of Origin: United States
- Warranty: 1 Year Limited
- MPN: 709DCDA-OSY-CFM 3/4NYC 8
- Temperature: 33°F to 110°F
- Certifications: ASSE-1048, UL, FM, USC
- Lead-Free: No
- Assembly Type: DCDA
- Hazard Protection Level: Low Health Hazard
- ASSE Standard: ASSE 1048
- USC FCCCHR Approved: Yes
- Fire Protection Listing: UL Classified;FM Approved
- Field Testable: Yes
- Shutoff Valves: OSY Gate
- Approved Orientation: N-Pattern
- Flood Sensor (SentryPlus Alert): No
- Strainer Included: No
- Air Gap Fitting Included: No
- Bypass Meter: CFM
Product Information
Dimensions
| Size Nominal | 8" | Inlet Size | 8" |
| Outlet Size | 8" | End Connection | Flanged |
Details
| Series | 709DCDA | Device Type | Double Check |
| Body Material | Cast Iron | Seat Material | Rubber |
| Application | Fire Protection | Operation | Continuous |
| Max Pressure PSI | 175.0 psi | Max Temp °F | 110.0 °F |
| Backflow Protection | Both | Options | Test Cocks, Bypass |
| Min Temp °F | 33.0 °F | Assembly Type | DCDA |
| Hazard Rating | Low Health Hazard | ASSE Standard | ASSE 1048 |
| USC Approved | Yes | Fire Listing | UL Classified, FM Approved |
| Testable | Yes | Shutoff Valve Type | OSY Gate |
| Orientation | N-Pattern | Detector Meter | CFM |
Certifications & Standards
| ASSE-1048 | UL |
| FM | USC |
Compare with similar products





| Backflow Protection | Both
| Both
| Both
| Both
| Both
|
| Assembly Type | DCDA
| DCDA
| DCDA
| DCDA
| DCDA
|
| Hazard Rating | Low Health Hazard
| Low Health Hazard
| Low Health Hazard
| Low Health Hazard
| Low Health Hazard
|
| ASSE Standard | ASSE 1048
| ASSE 1048
| ASSE 1048
| ASSE 1048
| ASSE 1048
|
| USC Approved | Yes | Yes | Yes | Yes | Yes |
| Fire Listing | UL Classified, FM Approved
| UL Classified, FM Approved
| UL Classified, FM Approved
| UL Classified, FM Approved
| UL Classified, FM Approved
|
| Testable | Yes | Yes | Yes | Yes | Yes |
| Shutoff Valve Type | OSY Gate
| Butterfly (Grooved)
| Butterfly (Grooved)
| Butterfly (Grooved)
| Butterfly (Grooved)
|
| Detector Meter | CFM
| CFM
| GPM
| CFM
| CFM
|
| Series | 709DCDA
| 757DCDA
| 757DCDA
| 757DCDA
| 757DCDA
|
| Country Of Origin | United States
| United States
| United States
| United States
| United States
|
| Warranty | 1 Year Limited
| 1 Year Limited
| 1 Year Limited
| 1 Year Limited
| 1 Year Limited
|
| Spec Sheet | |||||
| Device Type | Double Check
| Double Check
| Double Check
| Double Check
| Double Check
|
| Size Nominal | 8"
| 3"
| 6"
| 6"
| 3"
|
| Inlet Size | 8"
| 3"
| 6"
| 6"
| 3"
|
| Outlet Size | 8"
| 3"
| 6"
| 6"
| 3"
|
| Lead Free | — | Yes | Yes | Yes | Yes |
| End Connection | Flanged
| Grooved
| Grooved
| Grooved
| Grooved
|
| Body Material | Cast Iron
| Stainless
| Stainless
| Stainless
| Stainless
|
| Seat Material | Rubber
| Silicone
| Silicone
| Silicone
| Silicone
|
| Application | Fire Protection
| Fire Protection
| Fire Protection
| Fire Protection
| Fire Protection
|
| Operation | Continuous
| Continuous
| Continuous
| Continuous
| Continuous
|
| Max Pressure PSI | 175.0 psi | 175.0 psi | 175.0 psi | 175.0 psi | 175.0 psi |
| Max Temp °F | 110.0 °F | 140.0 °F | 140.0 °F | 140.0 °F | 140.0 °F |
| Certifications | ASSE-1048, UL, FM, USC
| UL, FM, USC
| UL, FM, USC
| UL, FM, USC
| UL, FM, USC
|
| Options | Test Cocks, Bypass
| Test Cocks, Gear Operator, Tamper Switch
| Test Cocks, Gear Operator, Tamper Switch
| Test Cocks, Gear Operator, Tamper Switch
| Test Cocks, Gear Operator, Tamper Switch
|
| Min Temp °F | 33.0 °F | 33.0 °F | 33.0 °F | 33.0 °F | 33.0 °F |
Recommended Products
Recently Viewed
What Our Customers Say
-
The best
Is ray -
They had what I needed to replace the stem on my 60 year old bathroom showers. Great service.
-
Ray is handsome and helpful. A good man to work with for any plumbing needs.
-
Professional services, excellent customer service
-
Excellent service and attention, everyone was very friendly. 5 stars for Mr. Julio.
-
Excellent service as always. All the stuff I needed. Thanks Julio.
-
Excellent service
-
Great place for plumbing parts and great service
-
Great prices and customer service!
-
Julio was very helpful and knowledgeable
-
Good service
-
Excellent service and help from the staff who work at this place


