The Elkay ECTRU30169RTFCW is a Crosstown 18 Gauge Workstation Stainless Steel, 31-1/2" x 18-1/2" x 9" Single Bowl Undermount Sink & Faucet Kit. It features a stainless steel body.
The Crosstown Workstation sink is the ideal solution for homeowners looking to maximize workspace in the kitchen. Custom accessories, included with the sink, slide back and forth along a built-in sink ledge allowing you to conveniently go from washing and chopping to straining and even clean up without cluttering the counter.
Features
- WORKSTATION SINK: Slide accessories along built-in sink ledge to optimize your workspace; go from meal prep to clean up in seconds.
- UNDERMOUNT INSTALLATION: Sink is installed beneath the countertop creating a seamless appearance between the sink and the countertop.
- SINGLE BOWL: Bowl gives you uninterrupted space for washing and stacking dishes or other household tasks.
- 18-GAUGE STAINLESS STEEL: Highest quality 18-gauge thickness and Type 304 stainless steel for lasting durability, performance and lustrous beauty.
- SOUND GUARD: Pads and undercoating enhance sound-deadening performance for a quieter time at the sink.
- TIGHT CORNERS: Fresh, geometric design offers straight sidewalls and a flat bottom for a modern look and more usable space; easy to clean.
- OFFSET DRAIN: Drain placement provides more usable space on the bottom of the sink and in the cabinet below.
- EXTRA DEEP BOWL: High-capacity bowl offers more room inside for stacking dishes, filling stockpots, and handling large baking sheets and roasters.
- CROSS BREAKS: Creased accent lines in the sink provide a professional appearance.
- DRAIN OPENING: Sink drain opening measures 3-1/2".
- DISPOSAL READY: This sink has a drain that works with standard garbage disposals, if space allows.
- CABINET SIZE: Minimum cabinet size for this sink is 36".
- KIT INCLUDES: LKAV2061CR faucet and custom wood cutting board, wood-handled colander, drying rack, roll-up drying rack, bottom grid(s), and drain(s); conveniently packaged together to save you time.
Common Questions
- What size cabinet does this need?
- A minimum 36" wide base cabinet.
- Undermount or drop-in?
- This is an undermount sink -- it mounts beneath the countertop for a seamless look and needs a fabricator to cut the counter opening.
- What does 18-gauge mean?
- 18 gauge is the thickness of the stainless steel -- a lower number is thicker, quieter and more dent-resistant. This model also has full spray sides and bottom with sides and bottom pads for added quiet.
- Will my faucet fit?
- Check your existing hole pattern against this sink's drilling: 0.
- What is included in the kit?
- This kit includes: Bottom grid CTXBG2815, Drain LKDD, Colander LKCB1217AC, Cutting Board LKB1217AC, Drying racks LKDR1317RU and LKDR0717SS and faucet LKAV2061CR.
Specifications
-
Type: Crosstown 18 Gauge Workstation Stainless Steel, 31-1/2" x 18-1/2" x 9" Single Bowl Undermount Sink & Faucet Kit
-
Outlet Size: 3-1/2"
-
Body Material: Stainless Steel
-
Country of Origin: China
-
MPN: ECTRU30169RTFCW
-
Certifications: ASME A112.19.3/CSA B45.4
-
Number of Bowls: 1
-
Minimum Cabinet Size (in): 36
-
Bowl Dimensions: 30" x 17" x 9"
-
Drain Location: Rear Right
-
Gauge: 18
-
Sound Deadening: Full spray sides and bottom with Sides and Bottom pads
-
Template Included: Yes
-
Mounting Hardware: Included
-
Workstation: Yes
-
Mount Type: Undermount
-
Coating / Finish: Polished Satin
-
Faucet Holes: 0
-
Overall Length (in): 31.5
-
Overall Width (in): 18.5
-
Overall Height (in): 9.0
-
Kit Includes: Bottom grid CTXBG2815, Drain LKDD, Colander LKCB1217AC, Cutting Board LKB1217AC, Drying racks LKDR1317RU and LKDR0717SS and faucet LKAV2061CR
-
Cutout Template (DXF): https://www.elkayfiles.com/templates/1000005511.dxf
