{"title":"SDS Max Bits","description":null,"products":[{"product_id":"milwaukee-48-20-3912-9-16-x-15-1-2-x-21-sds-max-2-cutter-carbide-bit","title":"Milwaukee 48-20-3912 SDS Max 4CT MX4 9\/16\" X 16\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3912 is a 9\/16 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 16 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3912\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 9\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 16.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147250286697,"sku":"48-20-3912","price":56.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_1a9bbe45-d6c1-43a7-8e95-364e193021c8.jpg?v=1738695694"},{"product_id":"milwaukee-48-20-3990-1-9-16-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3990 SDS Max 4CT MX4 1-9\/16\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3990 is a 1-9\/16 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3990\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-9\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147252416617,"sku":"48-20-3990","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_d2d541c3-8835-4d98-8a35-857c8d8ad4ce.jpg?v=1738695686"},{"product_id":"milwaukee-48-20-3958-1-1-16-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3958 SDS Max 4CT MX4 1-1\/16\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3958 is a 1-1\/16 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3958\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147255791721,"sku":"48-20-3958","price":99.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_dccb7a42-3391-4d2c-a335-18de6f0d45e4.jpg?v=1738695674"},{"product_id":"milwaukee-48-20-3984-1-7-16-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3984 SDS Max 4CT MX4 1-7\/16\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3984 is a 1-7\/16 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3984\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-7\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147260018793,"sku":"48-20-3984","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_857d5c4d-1579-4aeb-bf0f-e8043c5f7ab8.jpg?v=1738695657"},{"product_id":"milwaukee-48-20-3938-13-16-x-16-x-21-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3938 SDS Max 4CT MX4 13\/16\" X 17\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3938 is a 13\/16 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 17 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3938\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 13\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147260117097,"sku":"48-20-3938","price":74.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_1ffce496-2a9f-4682-b94f-3a0fc97a3542.jpg?v=1738695657"},{"product_id":"milwaukee-48-20-3926-11-16-x-15-1-2-x-21-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3926 SDS Max 4CT MX4 11\/16\" X 16\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3926 is an 11\/16 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 16 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3926\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 11\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 16.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147260182633,"sku":"48-20-3926","price":72.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_dc6c3a08-de21-4851-b94a-80d956d9049c.jpg?v=1738695656"},{"product_id":"milwaukee-48-20-5324-sdsmax-tunnel-3-1-8-x-22","title":"Milwaukee 48-20-5324 3-1\/8\" X 22\" One Piece SDS Max Tunnel Bit","description":"\u003cp\u003eThe Milwaukee 48-20-5324 is a 3-1\/8 in SDS Max hammer drill bit for concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRobust Head with Concrete Breakers for faster and more durable drilling in rebar\u003c\/li\u003e\n\u003cli\u003e3-Cutter Carbide Centering Tip: for precise starts and fast grinding of concrete and rebar\u003c\/li\u003e\n\u003cli\u003eCarbide Teeth with Rebar Chamfers provide increased durability in tough applications\u003c\/li\u003e\n\u003cli\u003eAlternating Carbide Geometry for fast shearing through concrete and rebar\u003c\/li\u003e\n\u003cli\u003eHigh Volume Sloped Flutes for faster dust removal\u003c\/li\u003e\n\u003cli\u003e22\" long shaft for deep hole drilling\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete, concrete with rebar, brick, and block\u003c\/li\u003e\n\u003cli\u003eFor Use in SDS Max Rotary Hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 20 in deep in one pass.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-5324\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 3-1\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 20.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147293147241,"sku":"48-20-5324","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-48-20-5324_01_c16aa302-c374-4249-a014-67b84cbb2056.jpg?v=1738695562"},{"product_id":"milwaukee-48-20-5306-sdsmax-tunnel-1-3-4-x-22","title":"Milwaukee 48-20-5306 1-3\/4\" X 22\" One Piece SDS Max Tunnel Bit","description":"\u003cp\u003eThe Milwaukee 48-20-5306 is a 1-3\/4 in SDS Max hammer drill bit for concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRobust Head with Concrete Breakers for faster and more durable drilling in rebar\u003c\/li\u003e\n\u003cli\u003e3-Cutter Carbide Centering Tip: for precise starts and fast grinding of concrete and rebar\u003c\/li\u003e\n\u003cli\u003eCarbide Teeth with Rebar Chamfers provide increased durability in tough applications\u003c\/li\u003e\n\u003cli\u003eAlternating Carbide Geometry for fast shearing through concrete and rebar\u003c\/li\u003e\n\u003cli\u003eHigh Volume Sloped Flutes for faster dust removal\u003c\/li\u003e\n\u003cli\u003e22\" long shaft for deep hole drilling\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete, concrete with rebar, brick, and block\u003c\/li\u003e\n\u003cli\u003eFor Use in SDS Max Rotary Hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 20 in deep in one pass.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-5306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 20.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147293868137,"sku":"48-20-5306","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-48-20-5318_01_4d2d23af-0f9e-40b3-98f9-34b12c1f7017.jpg?v=1738695559"},{"product_id":"milwaukee-48-20-5312-sdsmax-tunnel-2-1-8-x-22","title":"Milwaukee 48-20-5312 2-1\/8\" X 22\" One Piece SDS Max Tunnel Bit","description":"\u003cp\u003eThe Milwaukee 48-20-5312 is a 2-1\/8 in SDS Max hammer drill bit for concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRobust Head with Concrete Breakers for faster and more durable drilling in rebar\u003c\/li\u003e\n\u003cli\u003e3-Cutter Carbide Centering Tip: for precise starts and fast grinding of concrete and rebar\u003c\/li\u003e\n\u003cli\u003eCarbide Teeth with Rebar Chamfers provide increased durability in tough applications\u003c\/li\u003e\n\u003cli\u003eAlternating Carbide Geometry for fast shearing through concrete and rebar\u003c\/li\u003e\n\u003cli\u003eHigh Volume Sloped Flutes for faster dust removal\u003c\/li\u003e\n\u003cli\u003e22\" long shaft for deep hole drilling\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete, concrete with rebar, brick, and block\u003c\/li\u003e\n\u003cli\u003eFor Use in SDS Max Rotary Hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 20 in deep in one pass.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-5312\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 2-1\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 20.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147294326889,"sku":"48-20-5312","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-48-20-5318_01_aa16f192-5824-4ffe-aef9-a318753d92ba.jpg?v=1738695558"},{"product_id":"milwaukee-48-20-3923-sdsmax-4ct-5-8-x-54-x-60","title":"Milwaukee 48-20-3923 SDS Max 4CT MX4 5\/8\" X 54\" X 60\"","description":"\u003cp\u003eThe Milwaukee 48-20-3923 is a 5\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 54 in deep in one pass (overall length 60 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3923\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 5\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 54.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 60.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147294720105,"sku":"48-20-3923","price":291.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_2e1292a0-e810-4895-9b35-3c5658a5dc78.jpg?v=1738695557"},{"product_id":"milwaukee-48-20-5302-sdsmax-tunnel-1-1-2-x-22","title":"Milwaukee 48-20-5302 1-1\/2\" X 22\" One Piece SDS Max Tunnel Bit","description":"\u003cp\u003eThe Milwaukee 48-20-5302 is a 1-1\/2 in SDS Max hammer drill bit for concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRobust Head with Concrete Breakers for faster and more durable drilling in rebar\u003c\/li\u003e\n\u003cli\u003e3-Cutter Carbide Centering Tip: for precise starts and fast grinding of concrete and rebar\u003c\/li\u003e\n\u003cli\u003eCarbide Teeth with Rebar Chamfers provide increased durability in tough applications\u003c\/li\u003e\n\u003cli\u003eAlternating Carbide Geometry for fast shearing through concrete and rebar\u003c\/li\u003e\n\u003cli\u003eHigh Volume Sloped Flutes for faster dust removal\u003c\/li\u003e\n\u003cli\u003e22' long shaft for deep hole drilling\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete, concrete with rebar, brick, and block\u003c\/li\u003e\n\u003cli\u003eFor Use in SDS Max Rotary Hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 20 in deep in one pass.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-5302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 20.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147296096361,"sku":"48-20-5302","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-48-20-5318_01_bd66135c-ade5-4843-a2c3-8dc066628a3c.jpg?v=1738695557"},{"product_id":"milwaukee-48-20-3983-sdsmax-4ct-1-3-8-x-31-x-36","title":"Milwaukee 48-20-3983 SDS Max 4CT MX4 1-3\/8\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3983 is a 1-3\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3983\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-3\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147296555113,"sku":"48-20-3983","price":194.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_6de39406-db2e-48f7-9511-a34a79546267.jpg?v=1738695556"},{"product_id":"milwaukee-48-20-3906-sdsmax-2ct-1-2-x-31-x-36","title":"Milwaukee 48-20-3906 SDS Max 4CT MX4 1\/2\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3906 is a 1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3906\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147297046633,"sku":"48-20-3906","price":97.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_e88431d9-a5a9-486a-bad3-77023ebda590.jpg?v=1738695555"},{"product_id":"milwaukee-48-20-3909-sdsmax-2ct-1-2-x-54-x-60","title":"Milwaukee 48-20-3909 SDS Max 4CT MX4 1\/2\" X 54\" X 60\"","description":"\u003cp\u003eThe Milwaukee 48-20-3909 is a 1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 54 in deep in one pass (overall length 60 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3909\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 54.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 60.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147297669225,"sku":"48-20-3909","price":258.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_deb5654a-4990-4840-a568-7c7969387661.jpg?v=1738695555"},{"product_id":"milwaukee-48-20-3967-sdsmax-4ct-1-1-8-x-31-x-36","title":"Milwaukee 48-20-3967 SDSMAX 4CT 1-1\/8\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3967 is an 1-1\/8 in SDS Max hammer drill bit for concrete, masonry and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide for up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eCentering tip for exact spot drilling in concrete \u0026amp; metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eVariable flutes removes dust faster for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear mark indicator to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS-MAX rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3967\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Masonry;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147297964137,"sku":"48-20-3967","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_bd3254a8-d3a7-4d23-b00b-42bf573a401b.jpg?v=1738695554"},{"product_id":"milwaukee-48-20-3901-sdsmax-2ct-3-8-x-8-x-13","title":"Milwaukee 48-20-3901 SDS Max 4CT MX4 3\/8\" X 8\" X 13\"","description":"\u003cp\u003eThe Milwaukee 48-20-3901 is a 3\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 8 in deep in one pass (overall length 13 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3901\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 3\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 8.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 13.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147298291817,"sku":"48-20-3901","price":43.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_3082b315-5960-4012-9ad2-36247b9fd4d0.jpg?v=1738695554"},{"product_id":"milwaukee-48-20-5318-sdsmax-tunnel-2-1-2-x-22","title":"Milwaukee 48-20-5318 2-1\/2\" X 22\" One Piece SDS Max Tunnel Bit","description":"\u003cp\u003eThe Milwaukee 48-20-5318 is a 2-1\/2 in SDS Max hammer drill bit for concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRobust Head with Concrete Breakers for faster and more durable drilling in rebar\u003c\/li\u003e\n\u003cli\u003e3-Cutter Carbide Centering Tip: for precise starts and fast grinding of concrete and rebar\u003c\/li\u003e\n\u003cli\u003eCarbide Teeth with Rebar Chamfers provide increased durability in tough applications\u003c\/li\u003e\n\u003cli\u003eAlternating Carbide Geometry for fast shearing through concrete and rebar\u003c\/li\u003e\n\u003cli\u003eHigh Volume Sloped Flutes for faster dust removal\u003c\/li\u003e\n\u003cli\u003e22\" long shaft for deep hole drilling\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete, concrete with rebar, brick, and block\u003c\/li\u003e\n\u003cli\u003eFor Use in SDS Max Rotary Hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 20 in deep in one pass.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-5318\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 2-1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 20.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147298685033,"sku":"48-20-5318","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-48-20-5318_01_3c36104f-8512-442e-99d1-f33a03fdd376.jpg?v=1738695554"},{"product_id":"milwaukee-48-20-3949-sdsmax-4ct-7-8-x-31-x-36","title":"Milwaukee 48-20-3949 SDS Max 4CT MX4 7\/8\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3949 is a 7\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3949\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 7\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147299143785,"sku":"48-20-3949","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_99215b6a-437f-4c06-b465-9bc13e52518d.jpg?v=1738695553"},{"product_id":"milwaukee-48-20-3903-sdsmax-2ct-1-2-x-12-x-17","title":"Milwaukee 48-20-3903 SDS Max 4CT MX4 1\/2\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3903 is a 1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3903\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147299274857,"sku":"48-20-3903","price":52.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_9d7df074-5c89-4523-8095-107767faf9b9.jpg?v=1738695552"},{"product_id":"milwaukee-48-20-3905-sdsmax-2ct-1-2-x-23-x-28","title":"Milwaukee 48-20-3905 SDS Max 4CT MX4 1\/2\" X 24\" X 29\"","description":"\u003cp\u003eThe Milwaukee 48-20-3905 is a 1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 24 in deep in one pass (overall length 29 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3905\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 24.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 29.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147300356201,"sku":"48-20-3905","price":62.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_9326be73-69a4-4d5a-805a-7d3c5f8996da.jpg?v=1738695550"},{"product_id":"milwaukee-48-20-3945-7-8-x-17-sds-max-4-cutter-bit","title":"Milwaukee 48-20-3945 SDS Max 4CT MX4 7\/8\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3945 is a 7\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3945\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 7\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147326963817,"sku":"48-20-3945","price":69.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_ff0e01b1-876d-4664-88bf-85f448b6776f.jpg?v=1738695499"},{"product_id":"milwaukee-48-20-3931-3-4-x-17-sds-max-4-cutter-bit","title":"Milwaukee 48-20-3931 SDS Max 4CT MX4 3\/4\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3931 is a 3\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3931\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147333484649,"sku":"48-20-3931","price":69.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_0a7a9c4f-9f94-44ff-9a4e-04fb15bbfa69.jpg?v=1738695481"},{"product_id":"milwaukee-48-20-3918-5-8-x-15-1-2-x-21-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3918 SDS Max 4CT MX4 5\/8\" X 16\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3918 is a 5\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 16 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3918\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 5\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 16.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147702943849,"sku":"48-20-3918","price":67.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_8aa43b7d-f327-41b6-862a-b51cf19e76c3.jpg?v=1738694943"},{"product_id":"milwaukee-48-20-3966-1-1-8-x-17-x-21-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3966 SDS Max 4CT MX4 1-1\/8\" X 17\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3966 is an 1-1\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 17 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3966\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147708022889,"sku":"48-20-3966","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_deee7452-9867-4d09-9890-704444055328.jpg?v=1738694941"},{"product_id":"milwaukee-48-20-3953-1-x-17-sds-max-4-cutter-bit","title":"Milwaukee 48-20-3953 SDS Max 4CT MX4 1\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3953 is a 1 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3953\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147708416105,"sku":"48-20-3953","price":72.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_76066c81-22f2-4f62-b6ed-41f316bdda2f.jpg?v=1738694941"},{"product_id":"milwaukee-48-20-3970-1-1-4-x-10-x-15-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3970 SDS Max 4CT MX4 1-1\/4\" X 10\" X 15\"","description":"\u003cp\u003eThe Milwaukee 48-20-3970 is a 1-1\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 10 in deep in one pass (overall length 15 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3970\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 10.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 15.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147714445417,"sku":"48-20-3970","price":79.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_85f570ea-5929-4b1e-9fb1-014ac916e115.jpg?v=1738694935"},{"product_id":"milwaukee-48-20-3944-7-8-x-8-x-13-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3944 SDS Max 4CT MX4 7\/8\" X 8\" X 13\"","description":"\u003cp\u003eThe Milwaukee 48-20-3944 is a 7\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 8 in deep in one pass (overall length 13 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3944\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 7\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 8.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 13.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147715854441,"sku":"48-20-3944","price":61.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_1e35e168-9024-4a05-80bf-609192247bc0.jpg?v=1738694935"},{"product_id":"milwaukee-48-20-3946-7-8-x-17-x-21-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3946 SDS Max 4CT MX4 7\/8\" X 16\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3946 is a 7\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 16 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3946\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 7\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 16.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147718967401,"sku":"48-20-3946","price":76.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_fabc819c-97d5-4a8d-8249-e939967bd0d8.jpg?v=1738694932"},{"product_id":"milwaukee-48-20-3986-1-1-2-x-17-sds-max-4-cutter-bit","title":"Milwaukee 48-20-3986 SDS Max 4CT MX4 1-1\/2\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3986 is a 1-1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3986\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147721457769,"sku":"48-20-3986","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_f0b448c1-4571-4bc0-8a5e-c65fb3114660.jpg?v=1738694930"},{"product_id":"milwaukee-48-20-3975-1-3-8-x-17-sds-max-4-cutter-bit","title":"Milwaukee 48-20-3975 SDS Max 4CT MX4 1-3\/8\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3975 is a 1-3\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3975\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-3\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147800363113,"sku":"48-20-3975","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_bfad2173-51cc-4e7f-8fc8-5bcffdf2baf6.jpg?v=1738694848"},{"product_id":"milwaukee-48-20-3972-1-1-4-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3972 SDS-MAX 4CT MX4 1-1\/4\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3972 is a 1-1\/4 in SDS Max hammer drill bit for concrete, masonry and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide for up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eCentering tip for exact spot drilling in concrete \u0026amp; metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eVariable flutes removes dust faster for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear mark indicator to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS-MAX rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3972\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Masonry;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147801018473,"sku":"48-20-3972","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_1980e117-131a-46a3-9879-d9d289870648.jpg?v=1738694848"},{"product_id":"milwaukee-48-20-3930-3-4-x-8-x-13-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3930 SDS Max 4CT MX4 3\/4\" X 8\" X 13\"","description":"\u003cp\u003eThe Milwaukee 48-20-3930 is a 3\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 8 in deep in one pass (overall length 13 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3930\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 8.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 13.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147803574377,"sku":"48-20-3930","price":61.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_53b09d97-ee4a-427f-b700-01b44ec55107.jpg?v=1738694845"},{"product_id":"milwaukee-48-20-3910-9-16-x-7-1-2-x-13-sds-max-2-cutter-carbide-bit","title":"Milwaukee 48-20-3910 SDS Max 4CT MX4 9\/16\" X 8\" X 13\"","description":"\u003cp\u003eThe Milwaukee 48-20-3910 is a 9\/16 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 8 in deep in one pass (overall length 13 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 9\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 8.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 13.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147804033129,"sku":"48-20-3910","price":49.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_e4aa4c75-81cd-4320-bab9-159bc7f179f2.jpg?v=1738694843"},{"product_id":"milwaukee-48-20-3902-1-2-x-7-1-2-x-13-sds-max-2-cutter-carbide-bit","title":"Milwaukee 48-20-3902 SDS Max 4CT MX4 1\/2\" X 8\" X 13\"","description":"\u003cp\u003eThe Milwaukee 48-20-3902 is a 1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 8 in deep in one pass (overall length 13 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3902\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 8.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 13.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147805048937,"sku":"48-20-3902","price":49.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_d9b885c9-3ef5-4027-ab62-9a9a1c3bacf7.jpg?v=1738694841"},{"product_id":"milwaukee-48-20-3974-1-1-4-x-31-x-36-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3974 SDS Max 4CT MX4 1-1\/4\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3974 is a 1-1\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3974\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147805114473,"sku":"48-20-3974","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/48-20-3974.jpg?v=1738694840"},{"product_id":"milwaukee-48-20-3936-3-4-x-31-x-36-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3936 SDS Max 4CT MX4 3\/4\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3936 is a 3\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3936\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147805540457,"sku":"48-20-3936","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_3522413c-52ab-4475-87d6-0a50290c0285.jpg?v=1738694839"},{"product_id":"milwaukee-48-20-3916-5-8-x-7-1-2-x-13-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3916 SDS Max 4CT MX4 5\/8\" X 8\" X 13\"","description":"\u003cp\u003eThe Milwaukee 48-20-3916 is a 5\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 8 in deep in one pass (overall length 13 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3916\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 5\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 8.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 13.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147808063593,"sku":"48-20-3916","price":54.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_c02729b3-28b2-4aab-8a6b-5471fd01cc70.jpg?v=1738694838"},{"product_id":"milwaukee-48-20-3956-1-x-31-x-36-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3956 SDS Max 4CT MX4 1\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3956 is a 1 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3956\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147808227433,"sku":"48-20-3956","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_4a279adb-f6c0-46ea-9ce6-06d12be86fbe.jpg?v=1738694837"},{"product_id":"milwaukee-48-20-3964-1-1-8-x-12-x-17-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3964 SDS Max 4CT MX4 1-1\/8\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3964 is an 1-1\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3964\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147808686185,"sku":"48-20-3964","price":74.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_400ccf84-735b-470b-9faa-ee8fa521c036.jpg?v=1738694837"},{"product_id":"milwaukee-48-20-3988-1-1-2-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3988 SDS Max 4CT MX4 1-1\/2\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3988 is a 1-1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3988\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147808948329,"sku":"48-20-3988","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_8f6522f6-ac13-47da-adf5-720a713e2443.jpg?v=1738694836"},{"product_id":"milwaukee-48-20-3904-1-2-x-15-1-2-x-21-sds-max-2-cutter-carbide-bit","title":"Milwaukee 48-20-3904 SDS Max 4CT MX4 1\/2\" X 16\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3904 is a 1\/2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 16 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3904\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 16.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147810226281,"sku":"48-20-3904","price":54.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-2CTR-Bit_01_ddaaae36-ed29-43fc-9f0b-4c12d0c0d317.jpg?v=1738694836"},{"product_id":"milwaukee-48-20-3932-3-4-x-17-x-21-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3932 SDS Max 4CT MX4 3\/4\" X 16\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3932 is a 3\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 16 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3932\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 16.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147810324585,"sku":"48-20-3932","price":74.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_f6809b3e-c6d0-4bbd-8e13-4f9a0e853c1b.jpg?v=1738694835"},{"product_id":"milwaukee-48-20-3922-5-8-x-30-1-2-x-36-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3922 SDS Max 4CT MX4 5\/8\" X 31\" X 36\"","description":"\u003cp\u003eThe Milwaukee 48-20-3922 is a 5\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 31 in deep in one pass (overall length 36 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3922\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 5\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 31.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 36.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147811242089,"sku":"48-20-3922","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_b96982e1-9ca6-4071-ad52-840ab903d5f6.jpg?v=1738694835"},{"product_id":"milwaukee-48-20-3991-1-5-8-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3991 SDS Max 4CT MX4 1-5\/8\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3991 is a 1-5\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3991\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-5\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147811962985,"sku":"48-20-3991","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_13deaa15-3cf6-4245-b9b6-670ec2239282.jpg?v=1738694834"},{"product_id":"milwaukee-48-20-3954-1-x-17-x-21-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3954 SDS Max 4CT MX4 1\" X 17\" X 21\"","description":"\u003cp\u003eThe Milwaukee 48-20-3954 is a 1 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 17 in deep in one pass (overall length 21 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3954\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 21.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147812323433,"sku":"48-20-3954","price":78.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_520c89ae-6ef9-41b4-bd30-a05ddda14f0e.jpg?v=1738694834"},{"product_id":"milwaukee-48-20-3992-1-3-4-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3992 SDS Max 4CT MX4 1-3\/4\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3992 is a 1-3\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3992\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147814617193,"sku":"48-20-3992","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_96660350-6134-4d74-be1a-741ae371dee4.jpg?v=1738694831"},{"product_id":"milwaukee-48-20-3993-2-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3993 SDS Max 4CT MX4 2\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3993 is a 2 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3993\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147814682729,"sku":"48-20-3993","price":194.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_c2f9060c-d580-44e9-bd25-27e46868e5df.jpg?v=1738694830"},{"product_id":"milwaukee-48-20-3980-1-3-8-x-18-x-23-sds-max-4-cutter-carbide-bit","title":"Milwaukee 48-20-3980 SDS Max 4CT MX4 1-3\/8\" X 18\" X 23\"","description":"\u003cp\u003eThe Milwaukee 48-20-3980 is a 1-3\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for increased durabilty in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eVariable flutes for up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 18 in deep in one pass (overall length 23 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3980\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-3\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 18.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 23.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147816484969,"sku":"48-20-3980","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_e5c2abe8-9e2c-4a55-bfb6-2db746814344.jpg?v=1738694829"},{"product_id":"milwaukee-48-20-3917-5-8-x-17-sds-max-4-cutter","title":"Milwaukee 48-20-3917 SDS Max 4CT MX4 5\/8\" X 12\" X 17\"","description":"\u003cp\u003eThe Milwaukee 48-20-3917 is a 5\/8 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003eLock Up\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 12 in deep in one pass (overall length 17 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3917\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 5\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 12.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 17.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":31147901124713,"sku":"48-20-3917","price":62.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/Milwaukee-SDS-Max-4CTR-Bit_01_34d0772d-3092-4aee-9c62-2dda982ec7ea.jpg?v=1738694741"},{"product_id":"milwaukee-48-20-3973","title":"Milwaukee 48-20-3973 SDS Max 4CT MX4 1-1\/4\" X 24\" X 29\"","description":"\u003cp\u003eThe Milwaukee 48-20-3973 is a 1-1\/4 in SDS Max hammer drill bit for concrete and reinforced concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid head carbide delivers up to 5x longer life in concrete with rebar\u003c\/li\u003e\n\u003cli\u003eRebar guards for maximum durability in hard aggregate and rebar\u003c\/li\u003e\n\u003cli\u003eSharp centering tip for exact spot drilling in concrete and metal decking\u003c\/li\u003e\n\u003cli\u003e4-cutter design prevents lock-up in rebar, reducing downtime\u003c\/li\u003e\n\u003cli\u003eOptimized flutes remove dust faster reducing heat \u0026amp; delivering up to 15% more holes per battery charge\u003c\/li\u003e\n\u003cli\u003eGerman Made\u003c\/li\u003e\n\u003cli\u003eMeets ANSI B212.15 to fit common anchors\u003c\/li\u003e\n\u003cli\u003eWear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement\u003c\/li\u003e\n\u003cli\u003eIdeal for concrete with rebar and masonry\u003c\/li\u003e\n\u003cli\u003eFits all SDS Max rotary hammers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this fit my rotary hammer?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt has an SDS Max shank, so it fits SDS Max rotary hammers. It does not fit SDS Plus or Spline tools without an adapter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the holes fit standard concrete anchors?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMilwaukee states it meets ANSI B212.15, the carbide-tip tolerance that sizes holes for common anchors. The wear mark shows when the bit no longer meets it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow deep can it drill?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt drills up to 24 in deep in one pass (overall length 29 in).\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 48-20-3973\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ANSI B212.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter:\u003c\/strong\u003e 1-1\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type:\u003c\/strong\u003e SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth (in):\u003c\/strong\u003e 24.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (in):\u003c\/strong\u003e 29.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Concrete;Reinforced Concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Material:\u003c\/strong\u003e Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutters:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Role:\u003c\/strong\u003e Hammer Drill Bit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":67761550983467,"sku":"48-20-3973","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/8394211fc3e243d6ac193ba65ec1f6f8.webp?v=1792022678"}],"url":"https:\/\/citysupplygroup.com\/collections\/sds-max-bits.oembed?page=2","provider":"City Supply","version":"1.0","type":"link"}