{"title":"Press Fittings","description":null,"products":[{"product_id":"viega-2915-propress-coupling-with-stop-1-2-x-1-2-p1-x-p2","title":"Viega ProPress Coupling, With Stop, 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress coupling with stop (model 2915, order code 78047) has a 1\/2\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78047\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\/2\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394397159529,"sku":"PRO12CPL","price":36.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2915.jpg?v=1754090184"},{"product_id":"viega-2915-propress-coupling-with-stop-3-4-x-3-4-p1-x-p2","title":"Viega ProPress Coupling, With Stop, 3\/4\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress coupling with stop (model 2915, order code 78052) has a 3\/4\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78052\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394397225065,"sku":"PRO34CPL","price":55.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2915_f8e9460f-9d67-4cbc-9bbd-041642260f9c.jpg?v=1754090183"},{"product_id":"viega-2915-propress-coupling-with-stop-1-x-1-p1-x-p2","title":"Viega ProPress Coupling, With Stop, 1\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress coupling with stop (model 2915, order code 78057) has a 1\" Press x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394397290601,"sku":"PRO1CPL","price":55.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2915_804f5351-ffa5-4842-896d-f6b9e878e527.jpg?v=1754090182"},{"product_id":"viega-2915-propress-coupling-with-stop-1-1-4-x-1-1-4-p1-x-p2","title":"Viega ProPress Coupling, With Stop, 1-1\/4\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress coupling with stop (model 2915, order code 78062) has a 1-1\/4\" Press x 1-1\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78062\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" Press x 1-1\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394397323369,"sku":"PRO114CPL","price":123.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2915_5b915ece-b07a-4bfb-8d6c-a761f7c3f889.jpg?v=1754090181"},{"product_id":"viega-2915-propress-coupling-with-stop-1-1-2-x-1-1-2-p1-x-p2","title":"Viega ProPress Coupling, With Stop, 1-1\/2\"","description":"\u003cp\u003eThe Viega ProPress coupling with stop (model 2915, order code 78067) has a 1-1\/2\" Press x 1-1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/2\" Press x 1-1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394397356137,"sku":"PRO112CPL","price":25.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2915_b13d88b0-929c-4a83-91d0-04561daf084f.jpg?v=1754090181"},{"product_id":"viega-2915-propress-coupling-with-stop-2-x-2-p1-x-p2","title":"Viega ProPress Coupling, With Stop, 2\"","description":"\u003cp\u003eThe Viega ProPress coupling with stop (model 2915, order code 78072) has a 2\" Press x 2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78072\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" Press x 2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394397847657,"sku":"PRO2CPL","price":31.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2915_ecea8116-1862-4b2d-95e8-e61e0c63b5a3.jpg?v=1754090180"},{"product_id":"viega-2915-1-propress-reducer-3-4-x-1-2-ftg-x-p","title":"Viega ProPress Reducer, 3\/4\" FTG CTS x 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78077) has a 3\/4\" FTG (CTS) x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78077\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" FTG (CTS) x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394403713129,"sku":"PRO34.12FR","price":77.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151.jpg?v=1754090180"},{"product_id":"viega-2915-1-propress-reducer-1-x-1-2-ftg-x-p","title":"Viega ProPress Reducer, 1\" FTG CTS x 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78082) has a 1\" FTG (CTS) x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78082\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" FTG (CTS) x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394404106345,"sku":"PRO1.12FR","price":116.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_9493c26a-215b-4221-af32-a8386a39e3c6.jpg?v=1754090179"},{"product_id":"viega-2915-1-propress-reducer-1-x-3-4-ftg-x-p","title":"Viega ProPress Reducer, 1\" FTG CTS x 3\/4\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78087) has a 1\" FTG (CTS) x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78087\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" FTG (CTS) x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394404171881,"sku":"PRO1.34FR","price":113.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_7d3717b5-5ee7-448f-b6a3-e7277346a87c.jpg?v=1754090178"},{"product_id":"viega-2915-1-propress-reducer-1-1-4-x-3-4-ftg-x-p","title":"Viega ProPress Reducer, 1-1\/4\" FTG CTS x 3\/4\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78092) has a 1-1\/4\" FTG (CTS) x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" FTG (CTS) x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394404270185,"sku":"PRO114.34FR","price":68.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_27b8098f-6064-40a0-bcce-9d166c276327.jpg?v=1754090177"},{"product_id":"viega-2915-1-propress-reducer-1-1-4-x-1-ftg-x-p","title":"Viega ProPress Reducer, 1-1\/4\" FTG CTS x 1\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78097) has a 1-1\/4\" FTG (CTS) x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78097\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" FTG (CTS) x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394404335721,"sku":"PRO114.1FR","price":76.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_80055997-191d-4464-b945-d424625001fb.jpg?v=1754090175"},{"product_id":"viega-2915-1-propress-reducer-2-x-1-ftg-x-p","title":"Viega ProPress Reducer, 2\" FTG CTS x 1\"","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78112) has a 2\" FTG (CTS) x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" FTG (CTS) x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405122153,"sku":"PRO2.1FR","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_87da8ec4-d15c-4cfe-86e4-7feb33d1c4da.jpg?v=1754090175"},{"product_id":"viega-2915-1-propress-reducer-2-x-1-1-4-ftg-x-p","title":"Viega ProPress Reducer, 2\" FTG CTS x 1-1\/4\"","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78117) has a 2\" FTG (CTS) x 1-1\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" FTG (CTS) x 1-1\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405220457,"sku":"PRO2.114FR","price":33.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_7c55ccdc-49b7-42fd-bbd9-42ec8b92cd0d.jpg?v=1754090173"},{"product_id":"viega-2915-1-propress-reducer-2-x-1-1-2-ftg-x-p","title":"Viega ProPress Reducer, 2\" FTG CTS x 1-1\/2\"","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 78122) has a 2\" FTG (CTS) x 1-1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" FTG (CTS) x 1-1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405318761,"sku":"PRO2.112FR","price":29.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_9a478619-14c3-4676-bb3d-95a155eb492a.jpg?v=1754090172"},{"product_id":"viega-2915-1-propress-reducer-1-1-2-x-3-4-ftg-x-p","title":"Viega ProPress Reducer, 1-1\/2\" FTG CTS x 3\/4\"","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.1, order code 14543) has a 1-1\/2\" FTG (CTS) x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eStreet, press connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 14543\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/2\" FTG (CTS) x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405417065,"sku":"PRO112.34FR","price":21.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29151_422eb423-cd4b-481a-9fa9-bdac978d7f97.jpg?v=1754090172"},{"product_id":"viega-2915-2-propress-reducer-3-4-x-1-2-p1-x-p2","title":"Viega ProPress Reducer, 3\/4\" x 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.2, order code 78147) has a 3\/4\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78147\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405482601,"sku":"PRO34.12CPL","price":167.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29152.jpg?v=1754090170"},{"product_id":"viega-2915-2-propress-reducer-1-x-3-4-p1-x-p2","title":"Viega ProPress Reducer, 1\" x 3\/4\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.2, order code 78152) has a 1\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78152\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405646441,"sku":"PRO1.34CPL","price":195.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29152_ee03fcb5-9f41-46f1-843b-f2145e4c65ac.jpg?v=1754090169"},{"product_id":"viega-2915-2-propress-reducer-1-1-4-x-1-p1-x-p2","title":"Viega ProPress Reducer, 1-1\/4\" x 1\"","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.2, order code 78157) has a 1-1\/4\" Press x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78157\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" Press x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405711977,"sku":"PRO114.1CPL","price":50.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29152_bf20221c-4354-47d4-9b23-50c00cd79140.jpg?v=1754090168"},{"product_id":"viega-2915-2-propress-reducer-1-1-2-x-1-1-4-p1-x-p2","title":"Viega ProPress Reducer, 1-1\/2\" x 1-1\/4\"","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.2, order code 78162) has a 1-1\/2\" Press x 1-1\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78162\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/2\" Press x 1-1\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405810281,"sku":"PRO112.114CPL","price":45.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29152_08bcff93-f563-4e94-800e-1a694f0ba524.jpg?v=1754090167"},{"product_id":"viega-2915-2-propress-reducer-2-x-1-1-2-p1-x-p2","title":"Viega ProPress Reducer, 2\" x 1-1\/2\"","description":"\u003cp\u003eThe Viega ProPress reducer (model 2915.2, order code 78167) has a 2\" Press x 1-1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78167\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" Press x 1-1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394405875817,"sku":"PRO2.112CPL","price":47.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29152_cef97a77-84ac-4008-ae0e-87add221a34d.jpg?v=1754090166"},{"product_id":"viega-2915-3-propress-coupling-no-stop-1-2-x-1-2-p1-x-p2","title":"Viega ProPress Coupling, No Stop, 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress coupling, no stop (model 2915.3, order code 78172) has a 1\/2\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78172\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\/2\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394406563945,"sku":"PRO12CPLREP","price":90.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29153.jpg?v=1754090165"},{"product_id":"viega-2915-3-propress-coupling-no-stop-3-4-x-3-4-p1-x-p2","title":"Viega ProPress Coupling, No Stop, 3\/4\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress coupling, no stop (model 2915.3, order code 78177) has a 3\/4\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78177\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394406629481,"sku":"PRO34CPLREP","price":118.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29153_801ea069-8b44-44d7-b7f3-d6c4998007ad.jpg?v=1754090163"},{"product_id":"viega-2915-3-propress-coupling-no-stop-1-x-1-p1-x-p2","title":"Viega ProPress Coupling, No Stop, 1\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress coupling, no stop (model 2915.3, order code 78182) has a 1\" Press x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78182\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394406695017,"sku":"PRO1CPLREP","price":75.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29153_149fb44d-132a-4a99-ac24-8d2d4ec1e971.jpg?v=1754090163"},{"product_id":"viega-2915-3-propress-coupling-no-stop-1-1-4-x-1-1-4-p1-x-p2","title":"Viega ProPress Coupling, No Stop, 1-1\/4\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress coupling, no stop (model 2915.3, order code 78187) has a 1-1\/4\" Press x 1-1\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78187\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" Press x 1-1\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394406760553,"sku":"PRO114CPLREP","price":116.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29153_848f32c5-5abe-4bea-a182-eb9ed55296da.jpg?v=1754090162"},{"product_id":"viega-2915-3-propress-coupling-no-stop-1-1-2-x-1-1-2-p1-x-p2","title":"Viega ProPress Coupling, No Stop, 1-1\/2\"","description":"\u003cp\u003eThe Viega ProPress coupling, no stop (model 2915.3, order code 78192) has a 1-1\/2\" Press x 1-1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/2\" Press x 1-1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394408202345,"sku":"PRO112CPLREP","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29153_0fb513d9-681b-4ad8-a168-20af7cfd65c3.jpg?v=1754090161"},{"product_id":"viega-2915-3-propress-coupling-no-stop-2-x-2-p1-x-p2","title":"Viega ProPress Coupling, No Stop, 2\"","description":"\u003cp\u003eThe Viega ProPress coupling, no stop (model 2915.3, order code 78197) has a 2\" Press x 2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo stop\u003c\/li\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 78197\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Coupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" Press x 2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394408267881,"sku":"PRO2CPLREP","price":38.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29153_aaa1edcb-91cb-4eb8-b264-e480f3bc3147.jpg?v=1754090160"},{"product_id":"viega-2916-propress-90-elbow-1-2-x-1-2-p1-x-p2","title":"Viega ProPress 90° Elbow, 1\/2\" (Pack of 100)","description":"\u003cp\u003eThe Viega ProPress 90° elbow (model 2916, order code 77317) has a 1\/2\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 100.\u003c\/strong\u003e This item ships only in multiples of 100, so the price shown is for all 100.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77317\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\/2\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394408333417,"sku":"PRO1290","price":406.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2916.jpg?v=1754090160"},{"product_id":"viega-2916-propress-90-elbow-3-4-x-3-4-p1-x-p2","title":"Viega ProPress 90° Elbow, 3\/4\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress 90° elbow (model 2916, order code 77022) has a 3\/4\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394408530025,"sku":"PRO3490","price":65.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2916_dab3bfb2-75be-4837-89c6-cd1c9296d208.jpg?v=1754090159"},{"product_id":"viega-2916-propress-90-elbow-1-x-1-p1-x-p2","title":"Viega ProPress 90° Elbow, 1\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress 90° elbow (model 2916, order code 77027) has a 1\" Press x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394410332265,"sku":"PRO190","price":65.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2916_48b694e3-ea50-4fd5-b078-d50d4e76a74a.jpg?v=1754090158"},{"product_id":"viega-2916-propress-90-elbow-1-1-2-x-1-1-2-p1-x-p2","title":"Viega ProPress 90° Elbow, 1-1\/2\"","description":"\u003cp\u003eThe Viega ProPress 90° elbow (model 2916, order code 77037) has a 1-1\/2\" Press x 1-1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77037\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/2\" Press x 1-1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394410594409,"sku":"PRO11290","price":47.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2916_ebbfb1dd-023f-4c4e-aad8-f7a03fa5458a.jpg?v=1754090157"},{"product_id":"viega-2916-propress-90-elbow-2-x-2-p1-x-p2","title":"Viega ProPress 90° Elbow, 2\"","description":"\u003cp\u003eThe Viega ProPress 90° elbow (model 2916, order code 77042) has a 2\" Press x 2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77042\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" Press x 2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394410692713,"sku":"PRO290","price":67.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2916_5cb3b204-5d6a-4641-b0c4-4c426c4f0f69.jpg?v=1754090157"},{"product_id":"viega-2916-1-propress-90-street-elbow-1-2-x-1-2-p-x-ftg","title":"Viega ProPress 90° Street Elbow, 1\/2\" x 1\/2\" FTG CTS (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress 90° street elbow (model 2916.1, order code 77347) has a 1\/2\" Press x 1\/2\" FTG (CTS) port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection, street\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77347\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Street Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\/2\" Press x 1\/2\" FTG (CTS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394410725481,"sku":"PRO1290S","price":41.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29161.jpg?v=1754090156"},{"product_id":"viega-2916-1-propress-90-street-elbow-1-x-1-p-x-ftg","title":"Viega ProPress 90° Street Elbow, 1\" x 1\" FTG CTS (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress 90° street elbow (model 2916.1, order code 77057) has a 1\" Press x 1\" FTG (CTS) port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection, street\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Street Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" FTG (CTS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394410823785,"sku":"PRO190S","price":78.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29161_09097e17-3c40-4211-be8e-e99c25d5a22c.jpg?v=1754090155"},{"product_id":"viega-2916-1-propress-90-street-elbow-2-x-2-p-x-ftg","title":"Viega ProPress 90° Street Elbow, 2\" x 2\" FTG CTS","description":"\u003cp\u003eThe Viega ProPress 90° street elbow (model 2916.1, order code 77072) has a 2\" Press x 2\" FTG (CTS) port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection, street\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77072\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Street Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" Press x 2\" FTG (CTS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394411053161,"sku":"PRO290S","price":77.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29161_5e90ff51-ddea-4599-a4d2-3c67111c4ce6.jpg?v=1754090155"},{"product_id":"viega-2926-propress-45-elbow-1-2-x-1-2-p1-x-p2","title":"Viega ProPress 45° Elbow, 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress 45° elbow (model 2926, order code 77607) has a 1\/2\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77607\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\/2\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394411085929,"sku":"PRO1245","price":49.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2926.jpg?v=1754090154"},{"product_id":"viega-2926-propress-45-elbow-3-4-x-3-4-p1-x-p2","title":"Viega ProPress 45° Elbow, 3\/4\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress 45° elbow (model 2926, order code 77023) has a 3\/4\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394411151465,"sku":"PRO3445","price":57.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2926_8bb2687c-e985-42cd-a230-4d86a486c693.jpg?v=1754090153"},{"product_id":"viega-2926-propress-45-elbow-1-x-1-p1-x-p2","title":"Viega ProPress 45° Elbow, 1\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress 45° elbow (model 2926, order code 77028) has a 1\" Press x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77028\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394411217001,"sku":"PRO145","price":91.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2926_9d01c78a-e7a4-44b7-a2f2-b6d053ae14a6.jpg?v=1754090153"},{"product_id":"viega-2926-propress-45-elbow-2-x-2-p1-x-p2","title":"Viega ProPress 45° Elbow, 2\"","description":"\u003cp\u003eThe Viega ProPress 45° elbow (model 2926, order code 77043) has a 2\" Press x 2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 2\" Press x 2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394411348073,"sku":"PRO245","price":58.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2926_1b7ea7af-57cf-4a85-8bf0-d7ea48a23d1b.jpg?v=1754090152"},{"product_id":"viega-2926-1-propress-45-street-elbow-1-2-x-1-2-p-x-ftg","title":"Viega ProPress 45° Street Elbow, 1\/2\" x 1\/2\" FTG CTS (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress 45° street elbow (model 2926.1, order code 77637) has a 1\/2\" Press x 1\/2\" FTG (CTS) port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection, street\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing element\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77637\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Street Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Angle (degrees):\u003c\/strong\u003e 45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\/2\" Press x 1\/2\" FTG (CTS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Street\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394411380841,"sku":"PRO1245S","price":43.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm29261.jpg?v=1754090152"},{"product_id":"viega-2918-propress-tee-1-2-x-1-2-x-1-2-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77377) has a 1\/2\" Press x 1\/2\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77377\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\/2\" Press x 1\/2\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394411806825,"sku":"PRO12T","price":61.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918.jpg?v=1754090151"},{"product_id":"viega-2918-propress-tee-3-4-x-3-4-x-3-4-p1-x-p2-x-p3","title":"Viega ProPress Tee, 3\/4\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77387) has a 3\/4\" Press x 3\/4\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77387\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 3\/4\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394412003433,"sku":"PRO34T","price":108.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_d2ab1ac9-f0a2-4091-8b49-1899360255ff.jpg?v=1754090150"},{"product_id":"viega-2918-propress-tee-3-4-x-1-2-x-3-4-p1-x-p2-x-p3","title":"Viega ProPress Tee, 3\/4\" x 1\/2\" x 3\/4\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77397) has a 3\/4\" Press x 1\/2\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77397\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 1\/2\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394413215849,"sku":"PRO34.12.34T","price":96.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_5fa8dd95-ff95-42e8-bb22-682dda3e13ab.jpg?v=1754090149"},{"product_id":"viega-2918-propress-tee-3-4-x-3-4-x-1-2-p1-x-p2-x-p3","title":"Viega ProPress Tee, 3\/4\" x 3\/4\" x 1\/2\" (Pack of 10)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77402) has a 3\/4\" Press x 3\/4\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 10.\u003c\/strong\u003e This item ships only in multiples of 10, so the price shown is for all 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 3\/4\" Press x 3\/4\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394413314153,"sku":"PRO34.34.12T","price":94.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_3999f6d7-e40c-40be-9cca-7f56d2974fd5.jpg?v=1754090148"},{"product_id":"viega-2918-propress-tee-1-x-1-x-1-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77412) has a 1\" Press x 1\" Press x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" Press x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394413576297,"sku":"PRO1T","price":320.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_2a03e56f-250f-4d0c-935d-a1b93c7f0fc3.jpg?v=1754090147"},{"product_id":"viega-2918-propress-tee-1-x-3-4-x-3-4-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1\" x 3\/4\" x 3\/4\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77422) has a 1\" Press x 3\/4\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77422\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 3\/4\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394413740137,"sku":"PRO1.34.34T","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_77caf6b5-ae94-4f2b-b144-babc4de746d9.jpg?v=1754090147"},{"product_id":"viega-2918-propress-tee-1-x-1-x-1-2-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1\" x 1\" x 1\/2\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77432) has a 1\" Press x 1\" Press x 1\/2\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" Press x 1\/2\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394414755945,"sku":"PRO1.1.12T","price":119.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_43b043c4-3eb9-412e-a20d-a7c9c8498288.jpg?v=1754090146"},{"product_id":"viega-2918-propress-tee-1-x-1-x-3-4-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1\" x 1\" x 3\/4\" (Pack of 5)","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77437) has a 1\" Press x 1\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a pack of 5.\u003c\/strong\u003e This item ships only in multiples of 5, so the price shown is for all 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77437\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1\" Press x 1\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394414854249,"sku":"PRO1.1.34T","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_353fa502-cef4-4919-a560-cf52d452e9b3.jpg?v=1754090146"},{"product_id":"viega-2918-propress-tee-1-1-4-x-1-1-4-x-1-1-4-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1-1\/4\"","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77442) has a 1-1\/4\" Press x 1-1\/4\" Press x 1-1\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77442\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" Press x 1-1\/4\" Press x 1-1\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394414952553,"sku":"PRO114T","price":34.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_2e169fa0-5008-48c7-8e13-7b22246b46d6.jpg?v=1754090145"},{"product_id":"viega-2918-propress-tee-1-1-4-x-1-1-4-x-1-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1-1\/4\" x 1-1\/4\" x 1\"","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77447) has a 1-1\/4\" Press x 1-1\/4\" Press x 1\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77447\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" Press x 1-1\/4\" Press x 1\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394415050857,"sku":"PRO114.114.1T","price":35.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_6ea129d4-4c1e-4f4a-b12d-c1a536545496.jpg?v=1754090144"},{"product_id":"viega-2918-propress-tee-1-1-4-x-1-1-4-x-3-4-p1-x-p2-x-p3","title":"Viega ProPress Tee, 1-1\/4\" x 1-1\/4\" x 3\/4\"","description":"\u003cp\u003eThe Viega ProPress tee (model 2918, order code 77452) has a 1-1\/4\" Press x 1-1\/4\" Press x 3\/4\" Press port configuration and is made for use with ASTM B88 and B75 tubing. It features a copper body. Rated to 0°F to 250°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmart Connect Technology\u003c\/li\u003e\n\u003cli\u003eFor use with ASTM B88 and B75 tubing\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003ePress connection\u003c\/li\u003e\n\u003cli\u003eComponents EPDM sealing elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich pipe does this fitting fit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis ProPress fitting is made for use with ASTM B88 and B75 tubing. It is CTS sized: an IPS pipe of the same nominal size has a different outside diameter and will not seal in it.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich press tool and jaw do I need?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePress it with jaws or rings made for the ProPress profile. A jaw made for a different profile will not make a warrantable joint.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature and pressure is it rated for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt seals with a factory-installed EPDM sealing element, rated 0°F to 250°F (Viega seals and gaskets data). Viega's application chart rates this system to 300 psi.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan it be used on drinking water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Viega's application chart lists ProPress with the EPDM sealing element for potable water.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow do I find a joint that was not pressed?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSmart Connect technology: an unpressed connection leaks during a low-pressure test, so a missed press is found before the system goes into service.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (Run):\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 77452\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 0°F to 250°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Tee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Configuration:\u003c\/strong\u003e 1-1\/4\" Press x 1-1\/4\" Press x 3\/4\" Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connections:\u003c\/strong\u003e Press x Press x Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Basis (CTS \/ IPS):\u003c\/strong\u003e CTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Element:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress Profile:\u003c\/strong\u003e ProPress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use On:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Pressure (psi):\u003c\/strong\u003e 300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":31394415116393,"sku":"PRO114.114.34T","price":30.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/PPm2918_420dc568-b2fd-49ab-84bf-cb9bf3b14278.jpg?v=1754090144"}],"url":"https:\/\/citysupplygroup.com\/collections\/press-fittings.oembed","provider":"City Supply","version":"1.0","type":"link"}