{"title":"Butterfly Valves","description":null,"products":[{"product_id":"watts-bf03-121-45-2-valve","title":"Watts BF03-121-45 2 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF03-121-45 is a 2\" full-lug butterfly valve with an aluminum bronze disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 2 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve has a lever handle and is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 2\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF03-121-45 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244194545769,"sku":"0526823","price":747.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0_9d7a7ba0-7f3f-47c7-806a-99a89ea50450.jpg?v=1785979009"},{"product_id":"watts-bf03-121-45-2-1-2-valve","title":"Watts BF03-121-45 2 1\/2 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF03-121-45 is a 2-1\/2\" full-lug butterfly valve with an aluminum bronze disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 2 1\/2 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve has a lever handle and is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 2-1\/2\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF03-121-45 2 1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244194578537,"sku":"0526824","price":756.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0_ea6946ae-8601-4e51-a68d-8b45ade9a1f1.jpg?v=1785978980"},{"product_id":"watts-bf-03-221-15-nsf-valve","title":"Watts BF 03-221-15 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF is a 3\" full-lug butterfly valve with an aluminum bronze disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 3 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve has a lever handle and is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 3\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF 03-221-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244194644073,"sku":"0526825","price":755.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0_242dd3f4-8897-48ce-945b-6578061fff49.jpg?v=1785979069"},{"product_id":"watts-bf03-121-45-4-valve","title":"Watts BF03-121-45 4 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF03-121-45 is a 4\" full-lug butterfly valve with an aluminum bronze disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 4 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve has a lever handle and is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 4\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF03-121-45 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244194742377,"sku":"0526826","price":1025.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0.jpg?v=1785978834"},{"product_id":"watts-bf03-121-45-5-valve","title":"Watts BF03-121-45 5 Valve","description":"\u003cp\u003e5 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, Lever Handle, Nsf Approved\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244194807913,"sku":"526827","price":1345.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268503937.tif_6d7fd03d-a5b8-420f-bdc6-9cb77ed0a2c2.jpg?v=1746844035"},{"product_id":"watts-bf03-121-45-6-valve","title":"Watts BF03-121-45 6 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF03-121-45 is a 6\" full-lug butterfly valve with an aluminum bronze disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 6 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve has a lever handle and is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 6\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF03-121-45 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244195790953,"sku":"0526828","price":1460.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0_429c3753-622d-4b6c-8c15-3483141e3a7e.jpg?v=1785979051"},{"product_id":"watts-bf03-121-45-8-valve","title":"Watts BF03-121-45 8 Valve","description":"\u003cp\u003e8 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, Lever Handle, Nsf Approved\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244196970601,"sku":"526829","price":2118.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268503951.tif_f5e5f48b-ff82-40ee-8d82-5cbe9d1bf2c4.jpg?v=1746844033"},{"product_id":"watts-bf03-121-4g-6-valve","title":"Watts BF03-121-4G 6 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF03-121-4G is a 6\" full-lug butterfly valve with an aluminum bronze disc, operated by a gear operator. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 6 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat, with gear operator. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGear operator\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 6\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt 6\" the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF03-121-4G 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197036137,"sku":"0526830","price":1297.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0_28eb0fe0-1a34-47e0-b35b-5f4d9cfa6dea.jpg?v=1785979067"},{"product_id":"watts-bf03-121-4g-8-valve","title":"Watts BF03-121-4G 8 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF03-121-4G is a 8\" full-lug butterfly valve with an aluminum bronze disc, operated by a gear operator. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 8 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve has a lever handle and is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat, with gear operator. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGear operator\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 8\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt 8\" the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF03-121-4G 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197134441,"sku":"0526831","price":1761.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0_03ee5e86-6e3c-4e22-91f6-d452718a2f5d.jpg?v=1785979027"},{"product_id":"watts-bf03-121-4g-10-valve","title":"Watts BF03-121-4G 10 Valve","description":"\u003cp\u003e10 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, Gear Operator, Nsf Approved\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197167209,"sku":"526832","price":2165.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268503982_47b35e64-3956-4ca2-9efc-e23cb050b0ed.jpg?v=1746844032"},{"product_id":"watts-bf03-121-4g-12-valve","title":"Watts BF03-121-4G 12 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF03-121-4G is a 12\" full-lug butterfly valve with an aluminum bronze disc, operated by a gear operator. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 12 inch butterfly valve is designed specifically for applications which may require an NSF approved valve for potable water system applications. This valve has a lever handle and is constructed with a ductile iron body, aluminum bronze disc, 316 stainless steel shaft, and an NSF approved EPDM seat. It has a 200 psi pressure rating. It is to be used with ANSI 125 or 150 class flanges and comply with API 609 and MSS-SP 67 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGear operator\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNSF approved EPDM seat\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 12\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt 12\" the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF03-121-4G 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197298281,"sku":"0526833","price":3311.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a41b774b5690baf904ab2c9abbaf4415fe26a0e0_1db47c26-57f9-4287-a9b4-99cb8ae8a006.jpg?v=1785978970"},{"product_id":"watts-bf-03-111-15-m2-2-valve","title":"Watts BF-03-111-15-M2 2 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-111-15-M2 is a 2\" full-lug butterfly valve with a nickel-plated ductile iron disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 150 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 2 inch full lug style butterfly valve, model BF-03-111-15-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, ductile iron disc, EPDM seat, a stainless steel shaft, mounting pad for 10-position lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eDuctile iron disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (150 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 2\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-111-15-M2 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Ductile Iron, Nickel-Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197396585,"sku":"0525547","price":340.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_4d2353a4-d4ba-401c-b367-3409fe195c3e.jpg?v=1785978996"},{"product_id":"watts-bf-03-121-25-m2-2-valve","title":"Watts BF-03-121-25-M2 2 Valve","description":"\u003cp\u003e2 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Buna-N Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197560425,"sku":"525550","price":377.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268603538.tif_a681f62b-a9d8-44ec-8ce9-f76ede38c079.jpg?v=1746844030"},{"product_id":"watts-bf-03-111-15-m2-4-valve","title":"Watts BF-03-111-15-M2 4 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-111-15-M2 is a 4\" full-lug butterfly valve with a nickel-plated ductile iron disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 150 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 4 inch full lug style butterfly valve, model BF-03-111-15-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, ductile iron disc, EPDM seat, a stainless steel shaft, mounting pad for 10-position lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eDuctile iron disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (150 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 4\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-111-15-M2 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Ductile Iron, Nickel-Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197625961,"sku":"0525601","price":441.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_caa8e1ef-8c06-4db3-88bf-aaf0a2bc7ebe.jpg?v=1785979002"},{"product_id":"watts-bf-03-111-15-m2-6-valve","title":"Watts BF-03-111-15-M2 6 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-111-15-M2 is a 6\" full-lug butterfly valve with a nickel-plated ductile iron disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 150 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 6 inch full lug style butterfly valve, model BF-03-111-15-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, ductile iron disc, EPDM seat, a stainless steel shaft, mounting pad for 10-position lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eDuctile iron disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (150 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 6\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-111-15-M2 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Ductile Iron, Nickel-Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244197920873,"sku":"0525637","price":690.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_5d228d8e-774f-416c-8add-d68f8aa577c0.jpg?v=1785978907"},{"product_id":"watts-bf-03-121-15-m2-8-valve","title":"Watts BF-03-121-15-M2 8 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-121-15-M2 is a 8\" full-lug butterfly valve with an aluminum bronze disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 8\" full lug style butterfly valve, model BF-03-121-15-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, aluminum bronze disc, EPDM seat, a stainless steel shaft, mounting pad for 10-position lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 8\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-121-15-M2 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244198117481,"sku":"0525657","price":1047.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_1080bf23-2204-4e1b-8f29-fba44a55ec2c.jpg?v=1785978937"},{"product_id":"watts-bf-03-121-1g-m2-8-valve","title":"Watts BF-03-121-1G-M2 8 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-121-1G-M2 is a 8\" full-lug butterfly valve with an aluminum bronze disc, operated by a gear operator. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 8\" full lug style butterfly valve, model BF-03-121-1G-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, aluminum bronze disc, EPDM seat, a stainless steel shaft, mounting pad for gear operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eGear handle\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 8\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt 8\" the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-121-1G-M2 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244198674537,"sku":"0525669","price":1810.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_06bac429-8137-48d6-b994-94b57aa629dd.jpg?v=1785979064"},{"product_id":"watts-bf-03-121-15-m2-10-valve","title":"Watts BF-03-121-15-M2 10 Valve","description":"\u003cp\u003e10 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244199067753,"sku":"525675","price":1721.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268604764.tif_1b9d0e23-e9d6-4522-a679-861417d31d61.jpg?v=1746844027"},{"product_id":"watts-bf-03-121-1g-m2-14-valve","title":"Watts BF-03-121-1G-M2 14 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-121-1G-M2 is a full-lug butterfly valve with an aluminum bronze disc, operated by a gear operator. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 14\" full lug style butterfly valve, model BF-03-121-1G-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, aluminum bronze disc, EPDM seat, a stainless steel shaft, mounting pad for gear operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eGear handle\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in this pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt this the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-121-1G-M2 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244199624809,"sku":"0525717","price":4363.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_de36b62d-87d9-472f-835e-b24869f3fb1d.jpg?v=1785978899"},{"product_id":"watts-bf-03-121-1g-m2-16-valve","title":"Watts BF-03-121-1G-M2 16 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-121-1G-M2 is a full-lug butterfly valve with an aluminum bronze disc, operated by a gear operator. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 16\" full lug style butterfly valve, model BF-03-121-1G-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, aluminum bronze disc, EPDM seat, a stainless steel shaft, mounting pad for gear operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eGear handle\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in this pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt this the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-121-1G-M2 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244200149097,"sku":"0525729","price":7680.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_9e8cd163-5082-4a5b-bf95-4d51f1c48e93.jpg?v=1785978827"},{"product_id":"watts-bf-03-121-1g-m2-18-valve","title":"Watts BF-03-121-1G-M2 18 Valve","description":"\u003cp\u003e18 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, Gear Operator\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244201164905,"sku":"525741","price":10903.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268605617.tif_e0efd0ef-e4f2-46d2-8f68-0417e9baee4f.jpg?v=1746844026"},{"product_id":"watts-bf-03-131-1g-m2-valve","title":"Watts BF-03-131-1G-M2 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-131-1G-M2 is a full-lug butterfly valve with a 316 stainless steel disc, operated by a gear operator. It features a ductile iron body and a epdm seat. Rated to 150 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eDuctile iron disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eGear handle\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (150 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in this pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt this the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-131-1G-M2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244201230441,"sku":"0525743","price":11629.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_e3cf6439-56c5-4ef1-9c7f-274aaff91d64.jpg?v=1785978844"},{"product_id":"watts-bf-03-121-1g-m2-24-valve","title":"Watts BF-03-121-1G-M2 24 Valve","description":"\u003cp\u003e24 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, Gear Operator\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244201459817,"sku":"525765","price":24679.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268605907.tif_6e4579e3-b25c-4769-81ae-0a415c93faa6.jpg?v=1746844024"},{"product_id":"watts-bf-04-111-15-m2-2-valve","title":"Watts BF-04-111-15-M2 2 Butterfly Valve, Ductile Iron, Wafer","description":"\u003cp\u003eThe Watts BF-04-111-15-M2 is a 2\" wafer butterfly valve with a nickel-plated ductile iron disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 150 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 2 inch wafer style butterfly valve, model BF-04-111-15-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features cast iron body construction, ductile iron disc, EPDM seat, stainless steel shaft, mounting pad for 10 position lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eDuctile iron disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eWafer style\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. This is a wafer body, which is designed to be clamped between two mating flanges and is not rated for dead-end service — the downstream flange is what retains the seat. If you need to terminate a line or remove downstream piping with the valve holding pressure, choose the equivalent full-lug (BF-03\/DBF-03) model instead.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 2\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Wafer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-04-111-15-M2 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Ductile Iron, Nickel-Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244201885801,"sku":"0525769","price":308.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/a39380b55790b57aeb45e57a0fe9b3d964ff2a0e_c629d185-82f3-4efa-8578-e96314c6e113.jpg?v=1785979030"},{"product_id":"watts-bf-03-111-15-m2-2-1-2-valve","title":"Watts BF-03-111-15-M2 2 1\/2 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-111-15-M2 is a 2-1\/2\" full-lug butterfly valve with a nickel-plated ductile iron disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 150 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 2 1\/2 inch full lug style butterfly valve, model BF-03-111-15-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, ductile iron disc, EPDM seat, a stainless steel shaft, mounting pad for 10-position lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast iron body\u003c\/li\u003e\n\u003cli\u003eDuctile iron disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (150 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 2-1\/2\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-111-15-M2 2 1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Ductile Iron, Nickel-Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244202016873,"sku":"0525565","price":357.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_d91f0101-4e2e-4724-a76c-99c8b255a541.jpg?v=1785978981"},{"product_id":"watts-dbf-04-121-35-m2-4-valve","title":"Watts DBF-04-121-35-M2 4 Valve","description":"\u003cp\u003e4 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244202508393,"sku":"526154","price":6542.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640939_00a11562-815c-457f-aabb-91f149ce8f5a.jpg?v=1746844023"},{"product_id":"watts-dbf-03-111-1g-m2-10-valve","title":"Watts DBF-03-111-1G-M2 10 Valve","description":"\u003cp\u003e10 In Domestic Butterfly Valve, Full Lug, Ductile Iron Body, Ductile Iron Disc, 416 Ss Shaft, Epdm Seat, Gear Operator\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244202573929,"sku":"525240","price":3005.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268595086.tif_b01b0fed-b1a8-4737-a248-d6dc75c0e47c.jpg?v=1746844022"},{"product_id":"watts-dbf-04-131-15-m2-3-valve","title":"Watts DBF-04-131-15-M2 3 Butterfly Valve, Ductile Iron, Wafer","description":"\u003cp\u003eThe Watts DBF-04-131-15-M2 is a 3\" wafer butterfly valve with a 316 stainless steel disc, operated by a 10-position lever. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 3\" domestic wafer style butterfly valve, model DBF-04-131-15-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features cast iron body construction, stainless steel disc, EPDM seat, a stainless steel shaft, mounting pad for 10-position lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLever handle\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003e316 stainless steel disc\u003c\/li\u003e\n\u003cli\u003eEPDM seat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. This is a wafer body, which is designed to be clamped between two mating flanges and is not rated for dead-end service — the downstream flange is what retains the seat. If you need to terminate a line or remove downstream piping with the valve holding pressure, choose the equivalent full-lug (BF-03\/DBF-03) model instead.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a 10-position lever, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 3\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I throttle flow with this valve, or is it on\/off only?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth. The 10-position lever locks the disc at any of ten detents between full open and full closed, so it can throttle as well as provide positive shutoff. For fine or frequent throttling, or if the handle is hard to hold against flow, the gear-operated version of this model is the better choice.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Wafer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e DBF-04-131-15-M2 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e 10-Position Lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244202639465,"sku":"0525365","price":1007.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/d7dc1c1cb2c5971fb2af53a3d06d58ee84f1c04c_509eef22-92fb-4fd5-9f4f-c828f72572c8.jpg?v=1785979022"},{"product_id":"watts-dbf-04-131-35-m2-8-valve","title":"Watts DBF-04-131-35-M2 8 Valve","description":"\u003cp\u003e8 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244202672233,"sku":"526182","price":10847.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268641219_66a8ba36-e078-40ae-a152-60ba42365db5.jpg?v=1746844021"},{"product_id":"watts-dbf-04-131-3g-m2-8-valve","title":"Watts DBF-04-131-3G-M2 8 Valve","description":"\u003cp\u003e8 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Gear Operator\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244203262057,"sku":"526188","price":8925.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268641271_7d64e8d4-7856-464a-a214-c852f7892104.jpg?v=1746844020"},{"product_id":"watts-dbf-04-131-35-m2-10-valve","title":"Watts DBF-04-131-35-M2 10 Valve","description":"\u003cp\u003e10 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244203294825,"sku":"526191","price":14110.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268641301_4402b68b-9d51-436b-b5fc-fc1446658341.jpg?v=1746844020"},{"product_id":"watts-dbf-04-131-3g-m2-10-valve","title":"Watts DBF-04-131-3G-M2 10 Valve","description":"\u003cp\u003e10 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Gear Operator\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244204638313,"sku":"526197","price":11517.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268641363_d18a82ed-518f-4d72-9512-30969890b0b8.jpg?v=1746844019"},{"product_id":"watts-dbf-04-131-35-m2-12-valve","title":"Watts DBF-04-131-35-M2 12 Valve","description":"\u003cp\u003e12 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244204703849,"sku":"526200","price":18345.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268641394_2ec28a72-68d2-40cc-b404-68ca3b358e5c.jpg?v=1746844019"},{"product_id":"watts-dbf-04-131-3g-m2-12-valve","title":"Watts DBF-04-131-3G-M2 12 Valve","description":"\u003cp\u003e12 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Gear Operator\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244204769385,"sku":"526206","price":14949.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268641455_097d618a-c1ee-44ef-a03c-de908dc6fe6d.jpg?v=1746844018"},{"product_id":"watts-dbf-04-121-25-m2-5-valve","title":"Watts DBF-04-121-25-M2 5 Valve","description":"\u003cp\u003e5 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Buna-N Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244204802153,"sku":"525400","price":1148.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268650457_9680b613-91e4-460e-8538-444ba64bd88e.jpg?v=1746844018"},{"product_id":"watts-dbf-04-131-15-m2-10-valve","title":"Watts DBF-04-131-15-M2 10 Valve","description":"\u003cp\u003e10 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Epdm Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244204933225,"sku":"525455","price":4744.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268694543_69526a40-ec31-4600-9374-419bf1792000.jpg?v=1746844017"},{"product_id":"watts-dbf-04-131-15-m2-5-valve","title":"Watts DBF-04-131-15-M2 5 Valve","description":"\u003cp\u003e5 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Epdm Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244204965993,"sku":"525401","price":1756.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268596144_918eabce-e1c6-4841-bffd-08369ccf7056.jpg?v=1746844016"},{"product_id":"watts-bf-03-121-10-m2-valve","title":"Watts BF-03-121-10-M2 2-1\/2\" Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts BF-03-121-10-M2 is a 2-1\/2\" full-lug butterfly valve with an aluminum bronze disc, supplied bare-stem for actuator mounting. It features a ductile iron body and a epdm seat. Rated to 200 psi and 5°F to 248°F.\u003c\/p\u003e\u003cp\u003eThis 2 1\/2 inch full lug style butterfly valve is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features ductile iron body, aluminum bronze disc, stainless steel shaft, no handle, and NSF aproved EPDM seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUsed in HVAC, irrigation, OEM, commercial, and institutional applications\u003c\/li\u003e\n\u003cli\u003eControls the flow of liquids, gases, and slurries\u003c\/li\u003e\n\u003cli\u003eAluminum bronze disc\u003c\/li\u003e\n\u003cli\u003eNo handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e5°F to 248°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a EPDM seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships bare-stem — no handle or gear is fitted — which is the configuration you want when an actuator is going straight on.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 2-1\/2\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Irrigation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Bare Stem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e BF-03-121-10-M2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 5°F to 248°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e Aluminum Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 416 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Bare Stem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205031529,"sku":"0525573","price":374.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_a70d3c8d-b1d5-4c90-91d3-9103bd92a457.jpg?v=1785978952"},{"product_id":"watts-bf-03-121-10-m2-3-valve","title":"Watts BF-03-121-10-M2 3 Valve","description":"\u003cp\u003e3 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, No Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205097065,"sku":"525591","price":418.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268603934.tif_c03441af-ff88-40f2-a398-3935cee87beb.jpg?v=1746844015"},{"product_id":"watts-bf-03-121-10-m2-5-valve","title":"Watts BF-03-121-10-M2 5 Valve","description":"\u003cp\u003e5 In Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Epdm Seat, No Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205195369,"sku":"525627","price":729.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268604283.tif_42c8470c-2489-41da-b6e8-468772b34968.jpg?v=1746844015"},{"product_id":"watts-dbf-03-111-35-m2-3-valve","title":"Watts DBF-03-111-35-M2 3 Valve","description":"\u003cp\u003e3 In Domestic Butterfly Valve, Full Lug, Ductile Iron Body, Ductile Iron Disc, 416 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205260905,"sku":"526016","price":6920.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640021.tif_0c952339-de3e-4701-92c5-0f261ed3dfc5.jpg?v=1746844014"},{"product_id":"watts-dbf-03-121-35-m2-valve","title":"Watts DBF-03-121-35-M2 Valve","description":"\u003cp\u003e4 In Domestic Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205359209,"sku":"526026","price":5656.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640120.tif_dac4a8be-6b4c-40a0-bb24-0898965b5a58.jpg?v=1746844013"},{"product_id":"watts-dbf-03-111-30-m2-5-valve","title":"Watts DBF-03-111-30-M2 5 Valve","description":"\u003cp\u003e5 In Domestic Butterfly Valve, Full Lug, Ductile Iron Body, Ductile Iron Disc, 416 Ss Shaft, Viton Seat, No Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205424745,"sku":"526037","price":9316.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640236.tif_cab925e9-0c79-42e8-8a2f-03ea52190375.jpg?v=1746844013"},{"product_id":"watts-dbf-03-121-35-m2-8-valve","title":"Watts DBF-03-121-35-M2 8 Valve","description":"\u003cp\u003e8 In Domestic Butterfly Valve, Full Lug, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205523049,"sku":"526053","price":10967.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640397.tif_ce0ac07c-cf6c-4536-80cf-0a4f3e983ee8.jpg?v=1746844012"},{"product_id":"watts-dbf-04-121-35-m2-valve","title":"Watts DBF-04-121-35-M2 Valve","description":"\u003cp\u003e2 1\/2 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205588585,"sku":"526136","price":4447.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640755_62b31d64-a98a-4b8b-aeb5-1ae3f8e95541.jpg?v=1746844012"},{"product_id":"watts-dbf-04-121-35-m2-3-valve","title":"Watts DBF-04-121-35-M2 3 Valve","description":"\u003cp\u003e3 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, Aluminum Bronze Disc, 416 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205621353,"sku":"526145","price":5249.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640847_e024546e-73f6-4760-9f2a-38bc5ce4db5d.jpg?v=1746844011"},{"product_id":"watts-dbf-04-131-3g-m2-3-valve","title":"Watts DBF-04-131-3G-M2 3 Valve","description":"\u003cp\u003e3 In Domestic Butterfly Valve, Wafer, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Gear Operator\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244205686889,"sku":"526152","price":5115.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640915_209e1d6d-94f5-46ac-bae7-484d2fb34a5b.jpg?v=1746844011"},{"product_id":"watts-dbf-03-131-35-m2-6-valve","title":"Watts DBF-03-131-35-M2 6 Valve","description":"\u003cp\u003e6 In Domestic Butterfly Valve, Full Lug, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244206702697,"sku":"526045","price":8027.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640311.tif_5dc0fa28-6dd7-4fe4-89b9-6420d8c7590d.jpg?v=1746844010"},{"product_id":"watts-dbf-03-131-3g-m2-6-valve","title":"Watts DBF-03-131-3G-M2 6 Butterfly Valve, Ductile Iron, Lug","description":"\u003cp\u003eThe Watts DBF-03-131-3G-M2 is a 6\" full-lug butterfly valve with a 316 stainless steel disc, operated by a gear operator. It features a ductile iron body and a fkm (viton) seat. Rated to 200 psi and -4°F to 302°F.\u003c\/p\u003e\u003cp\u003eThis 6\" domestic full lug style butterfly valve, model DBF-03-131-3G-M2, is used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features cast iron body construction, stainless steel disc, viton seat, a stainless steel shaft, mounting pad for gear operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGear operator\u003c\/li\u003e\n\u003cli\u003eDuctile iron body\u003c\/li\u003e\n\u003cli\u003e316 stainless steel disc\u003c\/li\u003e\n\u003cli\u003eViton seat\u003c\/li\u003e\n\u003cli\u003eIncludes: Gear Operator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this valve at the end of a line or for dead-end service?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. This is a full-lug body, so it is rated for bidirectional dead-end service to the full pressure rating (200 psi). The threaded lugs let you unbolt and remove downstream piping while the valve holds pressure, so it can terminate a line or isolate equipment for service.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat temperature range does this valve handle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e-4°F to 302°F. On a resilient-seated butterfly valve the temperature limit is set by the seat elastomer, and this valve uses a FKM (Viton) seat. If you need a wider range, the same body is offered with other seat compounds: Buna-N (14°F to 176°F), EPDM (5°F to 248°F), or Viton (-4°F to 302°F).\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount an actuator on this valve?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The valve has an integral ISO 5211 mounting pad, so it accepts electric or pneumatic actuators without an adapter kit. This model ships with a gear operator, which can be removed and replaced with an actuator later.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this valve approved for potable water?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. It is NSF\/ANSI 61-G listed for potable-water service, and also meets MSS SP-67 and API 609 for face-to-face dimensions and construction.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this bolt up to my existing flanges?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, on ANSI 125\/150 flanges — this valve is dimensioned to API 609 and MSS SP-67 and mates to ANSI Class 125 and Class 150 flanges in 6\" pipe. Use the correct lug\/wafer bolting for your body style and check that the disc has room to swing clear of the mating pipe ID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does this model use a gear operator instead of a lever?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt 6\" the torque needed to unseat the disc is more than a hand lever can comfortably deliver, so this model ships with an enclosed gear operator and handwheel. The gearing also lets you throttle precisely and holds the disc position against flow, rather than relying on a detent plate.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butterfly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat \/ Seal Material:\u003c\/strong\u003e FKM (Viton)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure (psi):\u003c\/strong\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Domestic Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e DBF-03-131-3G-M2 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -4°F to 302°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF 61-G, MSS SP-67, API 609\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Material:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem Material:\u003c\/strong\u003e 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Type:\u003c\/strong\u003e Gear Operator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-End (End-of-Line) Service:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Class:\u003c\/strong\u003e ANSI 125\/150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Pad:\u003c\/strong\u003e ISO 5211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244206833769,"sku":"0526051","price":6299.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/files\/c775a0d6f199e8f2e369488e4c759d5bcf15e180_8f19b070-8fee-43a2-bc3a-e93703f80786.jpg?v=1785979060"},{"product_id":"watts-dbf-03-131-35-m2-8-valve","title":"Watts DBF-03-131-35-M2 8 Valve","description":"\u003cp\u003e8 In Domestic Butterfly Valve, Full Lug, Ductile Iron Body, 316 Ss Disc, 316 Ss Shaft, Viton Seat, Lever Handle\u003c\/p\u003e","brand":"Watts","offers":[{"title":"Default Title","offer_id":31244206997609,"sku":"526054","price":11028.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/3168\/9577\/products\/098268640403.tif_37e8b0cb-7782-495c-934a-cb7ee4722988.jpg?v=1746844009"}],"url":"https:\/\/citysupplygroup.com\/collections\/butterfly-valves-smart.oembed","provider":"City Supply","version":"1.0","type":"link"}